Configuration environment translation for '\${%s}' is not defined.
Cause: Configuration environment not defined.
%s = The configuration variable name.
Resolution: Check environment configuration.
SV-AP-10047 WARNING
Application
Command `%s` failed to execute: %s
Cause: Failed to execute variable command.
%s = The error message generated when trying to execute the command.
%s = The command.
Resolution: Review the associated command error. Check application execution permissions. Check command syntax and structure.
SV-AP-10048 WARNING
Application
Command `%s` died with signal %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit signal.
Resolution: Review the associated error signal. Check application execution permissions. Check command syntax and structure.
SV-AP-10049 WARNING
Application
Command `%s` exited with non-zero value %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit code.
Resolution: Review the associated exit code. Check command syntax and structure.
SV-AP-10050 WARNING
Resource Configuration
Hostname '%s' is not known.
Cause: Failed to convert Hostname into address. Hostname is not known.
%s = The hostname.
Resolution: Check Hostname configuration. Check address configuration. Check DNS availability.
SV-AP-10051 WARNING
Application
Unhandled Message '%s' for Context '%s' from App '%s'.
Cause: Application unable to handle message.
%s = The message.
%s = The message context.
%s = The sending application name.
Resolution: Contact N-Squared support.
SV-AP-10052 ALARM
Application
Application is now OVERLOADED.
Cause: Application is now overloaded to the point where processing is affected.
-
Resolution: Check application traffic levels and configuration.
SV-AP-10052 CLEAR
Application
Application is now %s (not OVERLOADED).
Cause: Application is no longer overloaded.
%s = The new loading level (NORMAL or HIGH)
Resolution: None.
SV-AP-10053 NOTICE
Application
Throttle Enabled: max %d instances, max tps (%d average over %d secs).
Cause: Parameter configuration at startup. Configured application throttling parameters.
%d = The configured maximum active instance count.
%d = The configured maximum TPS (new instances per second).
%d = The configured sliding window (in seconds) for measuring TPS.
Resolution: None.
SV-AP-10054 ALARM
Application
Application is now at HIGH LOAD.
Cause: Application is now at high-load (processing is not yet affected).
-
Resolution: Check application traffic levels and configuration.
Resolution: Check if target applications are overloaded and responding. Check the if the target applications are processing load. Check if downstream applications are accepting and processing requests.
SV-AP-10111 WARNING
Internal
Unsupported IPC mechanism.
Cause: Unsupported IPC mechanism.
-
Resolution: Contact N-Squared support.
SV-AP-10112 WARNING
Configuration
Unknown Application Name '%s' (not real or virtual).
Cause: Received request to get unknown real or virtual application.
Enabling 'statsd' notification to host %s:%d. Prefix = '%s'.
Cause: Parameter configuration at startup. Statsd statistics output enabled.
%s = The statsd host.
%d = The statsd port.
%s = The statsd prefix.
Resolution: None.
N2::TCP::ClientConnection
SV-TP-10100 WARNING
Application
SSL is not supported on '%s' connections. Ignored.
Cause: SSL is enabled. SSL is not supported for the current TCP protocol.
%s = The configured TCP protocol.
Resolution: Check application SSL and TCP protocol configuration.
SV-TP-10101 WARNING
Socket
Failed to create %s client socket: %s
Cause: Failed to create protocol socket.
%s = The socket protocol.
%s = The error that occurred when trying to create to the socket.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports creating TCP sockets.
SV-TP-10102 WARNING
Connection
Cannot set (new outbound) socket attributes: %s
Cause: Failed to set (new outbound) socket attributes.
%s = Description of the reason for failure, including the attribute type which could not be set.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports getting socket flags.
SV-TP-10103 WARNING
Socket
Failed to bind %s socket to '%s:%d': %s
Cause: Failed to bind to local socket.
%s = The configured TCP protocol.
%s = The configured local host.
%d = The configured local port.
%s = The error that occurred when trying to bind to the local socket.
Resolution: Review the associated error result. Check local bind configuration. Check the host machine supports creating sockets.
SV-TP-10104 WARNING
Application
Error resolving remote host '%s': %s
Cause: Unable to determine remote host.
%s = The configured remote host.
%s = The error that occurred when trying to bind to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10105 WARNING
Connection
Error connecting to remote host %s:%d: %s
Cause: Failed to connect to remote host.
%s = The configured remote host.
%d = The configured remote port.
%s = The error that occurred when trying to connect to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10106 WARNING
Connection.
Connection error [%s:%d]: %s
Cause: Connection error.
%s = The remote host.
%d = The remote port.
%s = The error that occurred when trying to connect to the remote host.,
Resolution: Review the associated error message. Check client connection configuration. Check remote host is up and accessible.
SV-TP-10107 WARNING
Connection
Connection error flagged: %s
Cause: Socket error when connecting to remote end.
%s = The socket error that occurred when trying to connect to the remote application,
Resolution: Review the associated error result. Check remote host is up and accepting connections.
SV-TP-10108 WARNING
Socket
Outbound connection SSL setup error: %s
Cause: Failed to convert outbound raw socket into Net::SSL context.
%s = The error that occurred when trying to convert socket to SSL.
Resolution: Review the associated error result. Check SSL configuration.
N2::TCP::Connection
SV-TP-10500 WARNING
Message
UDP Datagram sent only %d of %d bytes. Datagram was truncated.
Cause: Mis-formed UDP datagram detected.
%d = The number of bytes that were written via UDP.
%d = The total number of bytes that makes up the message.
Resolution: Review the message content construction. Inspect the UDP datagram payload.
SV-TP-10501 WARNING
Connection
Error calling recv: %s
Cause: Failed to receive on connection.
%s = The error that occurred when trying to read from the connection.
Resolution: Review the associated error result.
SV-TP-10502 WARNING
Connection
Error calling send: %s
Cause: Failed to send on connection.
%s = The error that occurred when trying to write to the connection.
Resolution: Review the associated error result.
N2::Trace
SV-AP-10065 WARNING
Application
Suppressed a total of %d duplicate warnings [%s].
Cause: The same warning ID was logged too many times in a fixed interval.
%d = The number of warnings that were suppressed.
%s = The event ID of the suppressed warnings.
Resolution: Address the underlying problem which caused the warnings.
WatchdogApp
SV-WD-10000 NOTICE
Configuration
Shutdown Notice = %d seconds.
Cause: Parameter configuration at startup. Shutdown notice seconds.
%d = The configured shutdown notice seconds.
Resolution: None.
SV-WD-10001 NOTICE
Configuration
Termination Notice = %d milliseconds.
Cause: Parameter configuration at startup. Termination notice seconds.
%d = The configured termination notice seconds.
Resolution: None.
SV-WD-10002 NOTICE
Configuration
Heartbeat Interval = %d seconds.
Cause: Parameter configuration at startup. Heartbeat interval seconds.
%d = The configured heartbeat interval seconds.
Resolution: None.
SV-WD-10003 NOTICE
Configuration
Heartbeat Response = %d milliseconds.
Cause: Parameter configuration at startup. Heartbeat response milliseconds.
%d = The configured heartbeat response milliseconds.
Resolution: None.
SV-WD-10004 NOTICE
Application
Sending Shutdown NOW. Termination in %d ms.
Cause: Shutdown event received.
%d = Time till application termination.
Resolution: None.
SV-WD-10005 NOTICE
Application
Heartbeats have been stopped.
Cause: Heartbeats have been stopped.
-
Resolution: None.
SV-WD-10006 NOTICE
Application
Handle but ignore duplicate SIGINT.
Cause: Received duplicate SIGINT. Signal ignored.
-
Resolution: None.
SV-WD-10007 NOTICE
Application
Sending Shutdown Notice NOW. Shutdown in %d secs.
Cause: Sending shutdown notice to child applications.
%d = Shutdown notice seconds.
Resolution: None.
SV-WD-10008 NOTICE
Application
Overdue App '%s' has been killed.
Cause: Overdue application has died, killed by the Watchdog.
%s = The application name.
Resolution: None.
SV-WD-10009 NOTICE
Application
Deceased App '%s' RESTART NOW.
Cause: Application is deceased. Restarting it now.
%s = The application name.
Resolution: None.
SV-WD-10010 NOTICE
Application
Deceased App '%s' RESTART APPEARS SUCCESSFUL.
Cause: Deceased application restarted.
%s = The application name.
Resolution: None.
SV-WD-10011 NOTICE
Application
Heartbeats have been re-started.
Cause: Heartbeats have been re-enabled.
-
Resolution: None.
SV-WD-10012 NOTICE
Application
Late heartbeat for overdue app '%s'. Termination has been cancelled.
Cause: Received late heartbeat response from application.
%s = The application name.
Resolution: None.
SV-WD-10014 WARNING
Application
Failed to receive !HEARTBEAT-RESPONSE for Application '%s', PID %s.
Cause: Failed to receive heartbeat for application.
%s = The application name.
%s = The application PID.
Resolution: Check application is not overloaded or in stuck state.
SV-WD-10015 WARNING
Application
Overdue App '%s' error checking for expiry at level '%s': %s
Cause: Application has been warned of overdue heartbeat.
%s = The application name.
%s = The current warning level attributed to the application.
%s = The current application process status.
Resolution: Check the application is not overloaded.
SV-WD-10016 WARNING
Application
Overdue App '%s' has died (independently).
Cause: Application has died.
%s = The application name.
Resolution: Contact N-Squared support.
SV-WD-10017 WARNING
Application
Overdue App '%s' will now be terminated.
Cause: Overdue application is being terminated.
%s = The application name.
Resolution: Check the application was not overloaded.
SV-WD-10018 WARNING
Application
Overdue App '%s' failed to confirm process termination: %s
Cause: Failed to confirm that application was terminated successfully.
%s = The name of the terminated application.
%s = The error that occurred when checking for termination.
Resolution: Check the application was not overloaded. Check process permissions and kernel error log.
SV-WD-10019 WARNING
Application
Overdue App '%s' has died (we terminated it).
Cause: Overdue application has terminated cleanly.
%s = The application name.
Resolution: Check the application was not overloaded.
SV-WD-10020 WARNING
Application
Overdue App '%s' will now be killed.
Cause: Overdue application did not cleanly terminate. Force kill.
%s = The application name.
Resolution: Check the application was not overloaded.
SV-WD-10021 WARNING
Application
Overdue App '%s' failed to confirm process termination: %s
Cause: Failed to confirm that a force-killed application was terminated successfully.
%s = The name of the terminated application.
%s = The error that occurred when checking for termination.
Resolution: Check the application was not overloaded. Check process permissions and kernel error log.
SV-WD-10022 NOTICE
Configuration
Application Heartbeats DISABLED.
Cause: Parameter configuration at startup. Application heartbeats are disabled.
-
Resolution: None.
SV-WD-10023 WARNING
Application
Deceased App '%s' RESTART FAILED: %s
Cause: Failed to restart deceased application.
%s = The application name.
%s = The error result when attempting to restart the deceased application.
Resolution: Review the associated error result.
SV-WD-10024 NOTICE
Application
Late heartbeat for overdue app '%s' is too late. Termination is already under way.
Cause: Heartbeat overdue for application. Terminating.
%s = The application name.
Resolution: None.
SV-WD-10025 WARNING
Internal
Discarding '%s' message with no Heartbeat App Name.
Cause: Received heartbeat response with no application name.
%s = The message name received.
Resolution: Contact N-Squared support.
SV-WD-10027 WARNING
Internal
Heartbeat Application Name '%s' not known!
Cause: Received heartbeat for unknown application.