Navigation :

TesterApp

Alarms

The following 220 alarms may be generated by N2SVCD Application “TesterApp”.

Show: Alarm Warning Clear Notice

No alarms found that match search criteria.

N2::Application

SV-AP-10000
WARNING

Connection

Error sending statistics: %s

Cause: An error was encountered sending application statistics.	%s = The error that occurred when sending statistics.
Resolution: Review N2SVCD statistics configuration. Ensure the endpoint is available.

SV-AP-10002
WARNING

Configuration

Unknown Peer Application [%s].

Cause: Received request to get handle for unknown peer application.	%s = The peer application name.
Resolution: Review requested peer application name. Review application configuration.

SV-AP-10003
WARNING

Connection

Failed to discover application name [%s] for [%s]: %s

Cause: Failed discovery of an application name.	%s = The application name which cannot be discovered/resolved. %s = The label specified at the time of requesting. %s = Additional reason description for the failure.
Resolution: Check that the remote application container is started, correctly configured, and is reachable, and that the container services API is correctly configured and available.

SV-AP-10004
NOTICE

Connection

Successful discovery of application name [%s] for [%s].

Cause: Successful discovery of an application name.	%s = The application name which was successfully discovered/resolved. %s = The label specified at the time of requesting.
Resolution: None.

SV-AP-10005
NOTICE

Application

IPC SHM index is %d.

Cause: Parameter configuration at startup. Configured application SHM information.	%d = The configured application SHM index.
Resolution: None.

SV-AP-10006
NOTICE

Application

Discovery %s (%s) - server [%s:%s].

Cause: Parameter configuration at startup. Configured application discovery information.	%s = Are we the discovery server or the client? %s = The configured socket discovery type. %s = The configured socket discovery host. %s = The configured socket discovery port.
Resolution: None.

SV-AP-10007
NOTICE

Application

IPC Socket Listen Port = %d.

Cause: Parameter configuration at startup. Configured IPC socket listen port.	%d = The IPC port on which this application accepts IPC message connections.
Resolution: None.

SV-AP-10008
WARNING

Connection

Failed to create client socket for app '%s:%s' endpoint %s:%d: %s.

Cause: Failed to create a new socket client handle.	%s = The application name. %s = The application subname (supplied or auto-generated). %s = The remote IP. %d = The remote TCP port. %s = The error description.
Resolution: Check that endpoint address is reachable.

SV-AP-10009
WARNING

Configuration

EDR App Name '%s' discovery failed: %s

Cause: EDR application discovery immediate failure.	%s = The EDR application name. %s = The reason for immediate failure.
Resolution: Check EDR agent application name configuration.

SV-AP-10012
NOTICE

Application

Trace Level is '%s'.

Cause: Parameter configuration at startup. Configured application trace level.	%s = The configured application trace level.
Resolution: None.

SV-AP-10013
NOTICE

Application

Trace Level Max is '%s'.

Cause: Parameter configuration at startup. Configured application max trace level.	%s = The configured max trace level.
Resolution: None.

SV-AP-10014
NOTICE

Application

Trace Per Second is '%s'.

Cause: Parameter configuration at startup. Configured application trace per second.	%s = The configured trace per second.
Resolution: None.

SV-AP-10015
NOTICE

Application

Retaining '%d' shutdown instances.

Cause: Parameter configuration at startup. Configured application instance retention count.	%d = The configured shutdown instance retention count.
Resolution: None.

SV-AP-10016
NOTICE

Application

Statistics Slice Count is '%s'.

Cause: Parameter configuration at startup. Configured application statistics slice count.	%s = The configured statistics slice count.
Resolution: None.

SV-AP-10017
NOTICE

Application

Statistics Slice Seconds is '%s'.

Cause: Parameter configuration at startup. Configured application statistics slice seconds.	%s = The configured statistics slice seconds.
Resolution: None.

SV-AP-10019
NOTICE

Application

EDR Application Name = '%s'.

Cause: Parameter configuration at startup. Configured EDR application name.	%s = The configured EDR application name.
Resolution: None.

SV-AP-10020
NOTICE

Application

EDR Default Stream = '%s'.

Cause: Parameter configuration at startup. Configured EDR stream.	%s = The configured EDR stream.
Resolution: None.

SV-AP-10021
WARNING

Configuration

Cannot write EDRs. Configured EDR App '%s' was not available at showtime.

Cause: Configured EDR application to utilize does not map to known application.	%s = The name of the EDR app that is not known.
Resolution: Check application configuration defines configured EDR application. Check configured EDR application exists and is configured.

SV-AP-10023
WARNING

Job

Unable to update parameter '%s' to value '%s': %s

Cause: SNMP set request could not be completed due to update failure.	%s = The parameter to update. %s = The received new value for the parameter. %s = The error that prevents the new value being used.
Resolution: Review error message and validate received message parameters accordingly.

SV-AP-10024
WARNING

Job

Unable to roll back parameter '%s' to value '%s' after update to value '%s': %s

Cause: SNMP set request could not roll back updated parameter after subsequent update failure.	%s = The parameter to update. %s = The received new value for the parameter. %s = The original value for the parameter. %s = The error that prevents the value from being rolled back to.
Resolution: Review error message and validate received message parameters accordingly.

SV-AP-10029
NOTICE

Application

EDRs are Supported but NOT Enabled.

Cause: Parameter configuration at startup. Application supports EDRs but they are not enabled.	-
Resolution: None.

SV-AP-10030
WARNING

Application

Application did not handle timeout reason '%s'.

Cause: Received timeout that the underlying application did not handle.	%s = The reason the timeout was not handled.
Resolution: Contact N-Squared support.

SV-AP-10031
NOTICE

Application

Configuration Scalar Update of '%s' %s.

Cause: Application configuration scalar value updated.	%s = The configuration key that was updated. %s = Whether or not the update was successful.
Resolution: None.

SV-AP-10032
NOTICE

Application

Configuration Vector Change of '%s' [%s] Succeeded.

Cause: Application configuration vector updated.	%s = The updated configuration key. %s = The update action.
Resolution: None.

SV-AP-10033
ALARM

Application

Application self transition from %s -> %s.

Cause: Application access has transitioned between ONLINE <=> SHUTDOWN/OFFLINE/QUIESCE.	%s = The original access level name (ONLINE). %s = The new access level name (SHUTDOWN/OFFLINE/QUIESCE).
Resolution: Confirm that this state change is expected.

SV-AP-10033
CLEAR

Application

Application self transition from %s -> %s.

Cause: Application access has transitioned between SHUTDOWN/OFFLINE/QUIESCE <=> ONLINE.	%s = The original access level name (SHUTDOWN/OFFLINE/QUIESCE). %s = The new access level name (ONLINE).
Resolution: None.

SV-AP-10034
WARNING

Internal

Instance [%s] already over when performing instance_over().

Cause: Instance received duplicate 'over' handler.	%s = Instance index.
Resolution: Contact N-Squared support.

SV-AP-10035
WARNING

Internal

Instance [%s] not found when performing instance_over().

Cause: Instance not found when performing 'over' handler.	%s = Instance index.
Resolution: Contact N-Squared support.

SV-AP-10038
WARNING

Internal

Failed to cancel timer [%s]: %s

Cause: Failed to cancel in progress timer.	%s = The reason the timer could not be canceled. %s = The error result when trying to cancel the timer.
Resolution: Review the associated error reason. Review the associated error result. Contact N-Squared support.

SV-AP-10039
WARNING

Internal

Discarding Message from unknown sender '%s'.

Cause: Received application message from unknown sender.	%s = The unknown sender.
Resolution: Contact N-Squared support.

SV-AP-10040
WARNING

Internal

Failed to process administrative message %s from %s: %s

Cause: Failed to process admin queue message.	%s = The message. %s = The sending application identifier (handle key). %s = The error result when trying to read from the message queue.
Resolution: Contact N-Squared support.

SV-AP-10041
WARNING

Internal

Failed to process user message %s from %s: %s

Cause: Failed to process user queue message.	%s = The message. %s = The sending application identifier (handle key). %s = The error result when trying to read from the message queue.
Resolution: Contact N-Squared support.

SV-AP-10042
WARNING

Configuration

Configuration Request for '%s' (%s) Failed: %s

Cause: Failed to query application configuration vector.	%s = The configuration key. %s = The configuration row key. %s = The error result when trying to query the configuration vector.
Resolution: Review the associated error result. Check the inbound message content construction.

SV-AP-10043
WARNING

Message

Resources Request for '%s' (%s) Failed: %s

Cause: Failed to query application resource.	%s = The resource key. %s = The resource key row. %s = The error result when trying to query the resource.
Resolution: Review the associated error result. Check the inbound message content construction.

SV-AP-10044
WARNING

Configuration

Configuration Update of '%s' Failed: %s

Cause: Failed to update application configuration scalar.	%s = The configuration key. %s = The error result when trying to update the configuration scalar.
Resolution: Review the associated error result. Check the configuration update message content construction.

SV-AP-10045
WARNING

Internal

Received instance message %s with no context. Discarding.

Cause: Received instance message with no context.	%s = The message.
Resolution: Review message construction. Ensure instance message contains instance context.

SV-AP-10046
WARNING

Configuration

Configuration environment translation for '\${%s}' is not defined.

Cause: Configuration environment not defined.	%s = The configuration variable name.
Resolution: Check environment configuration.

SV-AP-10047
WARNING

Configuration

Command `%s` failed to execute: %s

Cause: Failed to execute variable command.	%s = The error message generated when trying to execute the command. %s = The command.
Resolution: Review the associated command error. Check application execution permissions. Check command syntax and structure.

SV-AP-10048
WARNING

Configuration

Command `%s` died with signal %d.

Cause: Variable command execution exited with non-zero exit code.	%s = The command. %d = The exit signal.
Resolution: Review the associated error signal. Check application execution permissions. Check command syntax and structure.

SV-AP-10049
WARNING

Configuration

Command `%s` exited with non-zero value %d.

Cause: Variable command execution exited with non-zero exit code.	%s = The command. %d = The exit code.
Resolution: Review the associated exit code. Check command syntax and structure.

SV-AP-10050
WARNING

Resource
Configuration

Hostname '%s' is not known.

Cause: Failed to convert Hostname into address. Hostname is not known.	%s = The hostname.
Resolution: Check Hostname configuration. Check address configuration. Check DNS availability.

SV-AP-10051
WARNING

Internal

Unhandled Message '%s' for Context '%s' from App '%s'.

Cause: Application unable to handle message.	%s = The message. %s = The message context. %s = The sending application identifier (handle key).
Resolution: Contact N-Squared support.

SV-AP-10052
ALARM

Application

Application is now OVERLOADED.

Cause: Application is now overloaded to the point where processing is affected.	-
Resolution: Check application traffic levels and configuration.

SV-AP-10052
CLEAR

Application

Application is now %s (not OVERLOADED).

Cause: Application is no longer overloaded.	%s = The new loading level (NORMAL or HIGH)
Resolution: None.

SV-AP-10053
NOTICE

Application

Throttle Enabled: max %d instances, max tps (%d average over %d secs).

Cause: Parameter configuration at startup. Configured application throttling parameters.	%d = The configured maximum active instance count. %d = The configured maximum TPS (new instances per second). %d = The configured sliding window (in seconds) for measuring TPS.
Resolution: None.

SV-AP-10054
ALARM

Application

Application is now at HIGH LOAD.

Cause: Application is now at high-load (processing is not yet affected).	-
Resolution: Check application traffic levels and configuration.

SV-AP-10054
CLEAR

Application

Application is now %s (not HIGH LOAD).

Cause: Application is no longer at high-load.	%s = The new loading level (NORMAL)
Resolution: None.

SV-AP-10056
NOTICE

Application

Resource Vector Operation '%s' Succeeded.

Cause: Application resource vector operation successful.	%s = The vector operation key.
Resolution: None.

SV-AP-10057
WARNING

Internal

Error thawing %d byte envelope: %s

Cause: Failed to thaw message byte envelope.	%d = The message envelope length. %s = The error that occurred trying to thaw the payload.
Resolution: Contact N-Squared support.

SV-AP-10058
WARNING

Configuration

Resource Operation of '%s' Failed: %s

Cause: Failed to perform resource operation.	%s = The resource key. %s = The error result when trying to perform the resource operation.
Resolution: Review the associated error result. Check the configuration update message content construction.

N2::Application::AppInstance

SV-AP-10201
WARNING

Job

Shutdown/Abort: %s

Cause: A single instance has received an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc.	%s = The abort reason.
Resolution: Review the associated abort reason for further details.

SV-AP-10202
WARNING

Configuration

Cannot write EDRs. EDR Application Name is not correctly configured.

Cause: Cannot write EDR due to no configured EDR application.	-
Resolution: Check configured EDR application exists and is configured.

SV-AP-10203
WARNING

Store

Discarded EDR event '%s' after shutdown.

Cause: Received EDR write event after application shutdown.	%s = EDR event.
Resolution: Review the associated triggering event. Review shutdown procedure. Ensure no traffic is being processed when application shutdown is triggered.

SV-AP-10204
WARNING

Store

Failed sending EDR to EdrApp: %s

Cause: Failed to send EDR record to EDR writer process.	%s = The error result when attempting to write the EDR to the writer process.
Resolution: Review the associated error result. Contact N-Squared support.

SV-AP-10205
WARNING

Internal

Unhandled timer '%s' (discarded).

Cause: Received timeout that the underlying application did not handle timeout. The timer was discarded.	%s = The reason the timeout was not handled.
Resolution: Contact N-Squared support.

SV-AP-10206
WARNING

Internal

Unhandled message '%s' (discarded).

Cause: A message was received that was not handled. The message was discarded.	%s = The unhandled message.
Resolution: Contact N-Squared support.

N2::Application::Handle::Local

SV-AP-10301
WARNING

Internal

send_message 'sender_context' must be SCALAR.

Cause: Attempting to send message to application handle that contains non SCALAR 'sender_context'.	-
Resolution: Contact N-Squared support.

SV-AP-10302
WARNING

Internal

send_message 'context' must be SCALAR.

Cause: Attempting to send message to application with non SCALAR context.	-
Resolution: Contact N-Squared support.

SV-AP-10303
WARNING

Internal

send_message 'details' must be undef/HASH.

Cause: Attempting to send message to application with non SCALAR/HASH/ARRAY details.	-
Resolution: Contact N-Squared support.

SV-AP-10304
WARNING

Internal

Queue of non-management '%s' from '%s' to '%s' failed. Application status = STATUS_SHUTDOWN.

Cause: Received non-administrative message while in application shutdown.	%s = Message. %s = Sender name. %s = Application name.
Resolution: Contact N-Squared support.

SV-AP-10305
WARNING

Internal

ERROR cloning %s message parameters: %s

Cause: Failed to clone message parts for delivery in single-process.	%s = The message type being cloned at this time. %s = The error that occurred trying to clone the message part.
Resolution: Contact N-Squared support.

SV-AP-10306
WARNING

Internal

Queue '%s' to App '%s' (%s -> %s) failed: %s

Cause: Failed to queue message to application.	%s = Message. %s = Application name. %s = Sender context. %s = Context. %s = The error result message.
Resolution: Contact N-Squared support.

N2::Application::Handle::SHM

SV-AP-10401
WARNING

Internal

send_message 'sender_context' must be SCALAR.

Cause: Attempting to send shm IPC message to application handle that contains non SCALAR 'sender_context'.	-
Resolution: Contact N-Squared support.

SV-AP-10402
WARNING

Internal

send_message 'context' must be SCALAR.

Cause: Attempting to send shm IPC message to application with non SCALAR context.	-
Resolution: Contact N-Squared support.

SV-AP-10403
WARNING

Internal

send_message 'details' must be undef/HASH.

Cause: Attempting to send shm IPC message to application with non SCALAR/HASH/ARRAY details.	-
Resolution: Contact N-Squared support.

SV-AP-10409
WARNING

Internal

ERROR freezing (N2 encoding) %s message: %s

Cause: Failed to freeze message (N2 encoding) for delivery in socket IPC.	%s = The message type being frozen at this time. %s = The error that occurred trying to freeze the message.
Resolution: Contact N-Squared support.

SV-AP-10410
WARNING

Message

Failed to write SHM message %s to %s (%s Queue): %s

Cause: Failed to write message to SHM queue. Most likely full.	%s = Message name. %s = Target application name. %s = Is administrative message. %s = Reason for write failure.
Resolution: Check if target applications are overloaded and responding. Check the if the target applications are processing load. Check if downstream applications are accepting and processing requests.

N2::Application::Handle::Socket

SV-AP-10701
WARNING

Internal

send_message 'sender_context' must be SCALAR.

Cause: Attempting to send socket IPC message to application handle that contains non SCALAR 'sender_context'.	-
Resolution: Contact N-Squared support.

SV-AP-10702
WARNING

Internal

send_message 'context' must be SCALAR.

Cause: Attempting to send socket IPC message to application with non SCALAR context.	-
Resolution: Contact N-Squared support.

SV-AP-10703
WARNING

Internal

send_message 'details' must be undef/HASH.

Cause: Attempting to send socket IPC message to application with non SCALAR/HASH/ARRAY details.	-
Resolution: Contact N-Squared support.

SV-AP-10709
WARNING

Internal

ERROR freezing (BSON encoding) %s message: %s

Cause: Failed to freeze message (BSON encoding) for delivery in socket IPC.	%s = The message type being frozen at this time. %s = The error that occurred trying to freeze the message.
Resolution: Contact N-Squared support.

SV-AP-10710
WARNING

Message

Failed to write socket message %s to %s (%s Queue): %s

Cause: Failed to write message to socket queue.	%s = Message name. %s = Target application name. %s = Is administrative message (does not affect writing). %s = Reason for write failure.
Resolution: Check if target applications are overloaded and responding. Check the if the target applications are processing load. Check if downstream applications are accepting and processing requests.

N2::Application::Handle::Socket::SocketClientConnection

SV-AP-10501
NOTICE

Application

Outbound IPC (%s|%s) (%s -> %s) [%s].

Cause: Application outbound (client) socket connection has identified the peer endpoint.	%s = Our application real name. %s = The discovery name by which we found the peer. %s = The local bind IPs/port %s = The remote peer IPs/port %s = The peer self-identified endpoint name
Resolution: None.

SV-AP-10502
WARNING

Connection

Lost IPC connection to peer (%s) [%s]: %s

Cause: Application outbound (client) socket connection has been lost.	%s = The local handle key by which we identify the peer %s = The peer self-identified endpoint name %s = The error message associated with the connection failure.
Resolution: Review the associated error message. Check configuration and network status.

SV-AP-10503
NOTICE

Application

Ended IPC connection to peer (%s) [%s]: %s

Cause: Application outbound (client) socket connection has been ended during shutdown.	%s = The local handle key by which we identify the peer %s = The peer self-identified endpoint name %s = The error message associated with the connection failure.
Resolution: None.

SV-AP-10504
WARNING

Internal

ERROR thawing %d byte BSON envelope: %s

Cause: Failed to thaw message BSON byte envelope.	%d = The message envelope length. %s = The error that occurred trying to thaw the payload.
Resolution: Contact N-Squared support.

N2::Application::Handle::Socket::SocketServerConnection

SV-AP-10601
NOTICE

Application

Inbound IPC (%s) (%s -> %s) [%s].

Cause: Application inbound (server) socket connection has identified the peer endpoint.	%s = The local handle key containing the real peer name and the discovery name by which we were reached. %s = The remote peer host IPs/port %s = The local host IPs/port %s = Our own real application name.
Resolution: None.

SV-AP-10602
WARNING

Internal

ERROR thawing %d byte BSON envelope: %s

Cause: Failed to thaw message BSON byte envelope.	%d = The message envelope length. %s = The error that occurred trying to thaw the payload.
Resolution: Contact N-Squared support.

SV-AP-10603
NOTICE

Application

Lost IPC connection [%s]: %s

Cause: Application inbound (server) socket connection has been lost.	%s = The handle key containing the peer name and our public name %s = The error message associated with the connection failure.
Resolution: Review the associated error message. Check configuration and network status.

N2::Application::TcapApp

SV-TC-10101
WARNING

Internal

Discarding %s message without (|) context.

Cause: Received message that did not contain either an instance or transaction context.	%s = The received message.
Resolution: Contact N-Squared support.

SV-TC-10102
WARNING

Message

Failed to send TCAP-TXNCHECK-RESPONSE notification: %s

Cause: Failed to send TCAP transaction check response notification.	%s = The error result generated when trying to send the notification.
Resolution: Review the associated error result.

SV-TC-10103
WARNING

Message

Discarding %s message for expired instance_idx|transaction = '%s', TID %s.

Cause: Received message for expired instance_idx or transaction. Message discarded.	%s = The received message. %s = The instance/transaction context. %s = The local TID.
Resolution: Review the inbound message order and content construction.

SV-TC-10104
WARNING

Internal

Received TCAP-TXNCHECK-REQUEST for unknown transaction %s.

Cause: Received TCAP transaction check request for unknown transaction.	%s = The received message transaction.
Resolution: Contact N-Squared support.

SV-TC-10105
WARNING

Message

Failed to send TCAP-TXNCHECK-RESPONSE for transaction %s: %s

Cause: Failed to send TCAP transaction check response for transaction.	%s = The failing transaction. %s = The error result generated when trying to send the response.
Resolution: Review the associated error result.

SV-TC-10106
WARNING

Message

Discarding %s message without type.

Cause: Received message without message type. Message discarded.	%s = The received message.
Resolution: Check inbound message content construction.

SV-TC-10107
WARNING

Message

Discarding '%s' (%s) message without (local_tid) sender_context.

Cause: Received message without send context. Message discarded.	%s = The received message. %s = The message type.
Resolution: Check inbound message content construction.

SV-TC-10108
WARNING

Message

Discarding associated TCAP_BEGIN for unknown instance_idx|transaction = '%s', New TID %s.

Cause: Received associated TCAP begin for unknown instance.	%s = The message context. %s = The associated local TID.
Resolution: Check network is delivering messages in good time without replay.

SV-TC-10109
WARNING

Job

Aborting/discarding second TCAP_BEGIN for already-associated transaction = '%s'.

Cause: Received a second TCAP_BEGIN for an already-open transaction.	%s = The transaction key.
Resolution: Check network is delivering messages in good time without replay.

SV-TC-10110
WARNING

Message

Discarding (initial) TCAP_BEGIN sent %.1f seconds ago.

Cause: Received TCAP begin that exceeded the maximum expiry seconds. TCAP begin discarded.	%.1f = The amount of seconds since the TCAP begin was sent.
Resolution: Review associated expiry seconds. Ensure downstream Sigtran components are still available and processing requests.

SV-TC-10111
WARNING

Message

Aborting (initial) TCAP_BEGIN rejected by Application: %s

Cause: TCAP begin rejected.	%s = The error result generated by the application that reject the TCAP begin.
Resolution: Review the associated error result.

SV-TC-10112
WARNING

Message

Discarding '%s' (%s) message without (instance_idx|transaction) context.

Cause: Received message without instance/transaction context. Message discarded.	%s = The received message. %s = The message type.
Resolution: Review message content construction.

SV-TC-10113
WARNING

Message

Discarding '%s' (%s) message without (local_tid) sender_context.

Cause: Received message without sender context. Message discarded.	%s = The received message. %s = The message type.
Resolution: Review message content construction.

SV-TC-10114
WARNING

Message

Discarding '%s' (%s) message for unknown/expired instance %s.

Cause: Received message for unknown/expired instance. Message discarded.	%s = The received message. %s = The message type. %s = The instance context.
Resolution: Review message content construction.

SV-TC-10115
WARNING

Message

Discarding '%s' (%s) message for unknown transaction %s on instance %s.

Cause: Received message for unknown instance transaction. Message discarded.	%s = The received message. %s = The message type. %s = The instance transaction. %s = The instance context.
Resolution: Review message content construction.

SV-TC-10116
WARNING

Message

Discarding '%s' (%s) unsupported TCAP type.

Cause: Received unsupported TCAP type.	%s = The received message. %s = The message type.
Resolution: Review the requested TCAP type. Review the message content construction. Contact N-Squared support.

SV-TC-10117
WARNING

Message

Discarded unrecognised component element.

Cause: Unsupported component element. Component discarded.	-
Resolution: Check component element is valid.

N2::Application::TcapApp::TcapInstance

SV-TC-10130
WARNING

Message

Invalid components for TCAP SEND: %s

Cause: Attempt to send invalid component structure.	%s = Component reference type.
Resolution: Contact N-Squared support.

SV-TC-10202
WARNING

Internal

Attempt to close unknown transaction %s.

Cause: Attempted to close unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10203
WARNING

Internal

Double close on transaction %s - %s after %s.

Cause: Attempted to close transaction that is already closed.	%s = The transaction. %s = The reason generated when trying to perform a duplicate close. %s = The reason generated when originally closing the transaction.
Resolution: Contact N-Squared support.

SV-TC-10208
WARNING

Internal

Attempt to set returned AC on unknown transaction %s.

Cause: Attempt to set returned application context on unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10209
WARNING

Internal

Attempt to set returned result on unknown transaction %s.

Cause: Attempt to set result dialogue parameters on unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10210
WARNING

Internal

Attempt to get AC on unknown transaction %s.

Cause: Attempt to get application context from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10211
WARNING

Internal

Attempt to get AARE dialogue result on unknown transaction %s.

Cause: Attempt to get application context from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10212
WARNING

Internal

Overloading Transaction '%s'. Local TID '%s' is lost!

Cause: Duplicate initialise method call on non-closed transaction.	%s = The transaction. %s = The local TID that has been lost.
Resolution: Contact N-Squared support.

SV-TC-10214
WARNING

Internal

Attempt to create invoke component for unknown transaction %s.

Cause: Attempt to invoke unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10215
WARNING

Internal

Attempt to get last sent opcode for unknown transaction %s.

Cause: Attempt to get last sent opcode for unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10216
WARNING

Internal

Attempt to get last received invoke id for unknown transaction %s.

Cause: Attempt to get last received invoke ID for unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10218
WARNING

Job

Failed to ABORT open TCAP Transaction '%s' with Local TID '%s' at shutdown: %s

Cause: Failed to abort open TCAP transaction at instance shutdown.	%s = The transaction. %s = The transaction local TID. %s = The result message generated when trying to send the abort.
Resolution: Review the associated error result.

SV-TC-10219
WARNING

Internal

Attempt to get remote SCCP on unknown transaction %s.

Cause: Attempt to get remote SCCP address from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10220
WARNING

Internal

Attempt to get TIDs on unknown transaction %s.

Cause: Attempt to get TIDs from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10221
WARNING

Internal

Attempt to get local SCCP on unknown transaction %s.

Cause: Attempt to get local SCCP address from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

N2::Match

SV-MA-10000
WARNING

Configuration

match_value: Split of undefined or non-scalar '%s' element.

Cause: Split of undefined or non scalar element.	%s = The element type.
Resolution: Review the associated non-scalar element type. Check inbound element content construction.

SV-MA-10001
WARNING

Configuration

match_value: Index. Non-ARRAY '%s' at '%s' in '%s' (Index %d). Abandon.

Cause: Index non array.	%s = The element part. %s = The unexpected value type. %s = The element key. %d = The element array index.
Resolution: Review the associated error message. Check inbound element content construction.

SV-MA-10002
WARNING

Configuration

match_value: Filter. Non-ARRAY, Non-Hash at '%s' in '%s'. Abandon.

Cause: Filter non-array or hash.	%s = The element part. %s = The element key.
Resolution: Review the associated error message. Check inbound element content construction.

SV-MA-10003
WARNING

Configuration

match_value: Expecting HASH. Found single-entry ARRAY but it contains a %s, not a HASH.

Cause: Expected hash but got single entry array with non hash value.	%s = The element type.
Resolution: Review the associated error message. Check inbound element content construction.

SV-MA-10004
WARNING

Configuration

match_value: non-HASH at '%s' in '%s'. Abandon.

Cause: Non hash value.	%s = The element part. %s = The element key.
Resolution: Review the associated error message. Check inbound element content construction.

SV-MA-10005
WARNING

Configuration

match1s_regex: Invalid RegEx pattern /%s/: %s

Cause: Invalid regular expression pattern.	%s = The expected regular expression pattern. %s = The error encountered.
Resolution: Review the associated error result. Check inbound regular expression construction is valid.

N2::SNMP::MessageV3

SV-AP-10001
NOTICE

Configuration

Using localised authentication key '%s' for SNMP v3 messages for engine ID '%s' and user ID '%s'.

Cause: Notification of the localised SNMP v3 authentication key generated from a plaintext password. For strict compatibility with SNMP v3, authentication keys should be configured instead of passwords.	%s = The localised key that will be used for SNMP v3 authentication. %s = The SNMP engine ID used to generate the authentication key. %s = The SNMP user ID the authentication key belongs to.
Resolution: None.

SV-AP-10011
NOTICE

Configuration

Using localised privacy key '%s' for SNMP v3 messages for engine ID '%s' and user ID '%s'.

Cause: Notification of the localised SNMP v3 privacy key generated from a plaintext password. For strict compatibility with SNMP v3, privacy keys should be configured instead of passwords.	%s = The localised key that will be used for SNMP v3 encryption. %s = The SNMP engine ID used to generate the privacy key. %s = The SNMP user ID the privacy key belongs to.
Resolution: None.

N2::TCP::Connection

SV-TP-10500
WARNING

Message

UDP Datagram sent only %d of %d bytes. Datagram was truncated.

Cause: Mis-formed UDP datagram detected.	%d = The number of bytes that were written via UDP. %d = The total number of bytes contained in the full datagram.
Resolution: Review the message content construction. Inspect the UDP datagram payload.

SV-TP-10506
WARNING

Message

Received invalid SCTP notification with length %d < 8.

Cause: Received invalid SCTP notification.	%d = The received notification length.
Resolution: Contact N-Squared support.

SV-TP-10507
WARNING

Message

Received invalid SCTP notification with length %d != sn_length %d.

Cause: Received invalid SCTP notification.	%d = The received notification length. %d = The notification length, as indicated in the notification.
Resolution: Contact N-Squared support.

SV-TP-10508
WARNING

Message

Received invalid SCTP_ASSOC_CHANGE notification with length %d < 20.

Cause: Received invalid SCTP association change notification.	%d = The received association change notification length.
Resolution: Contact N-Squared support.

SV-TP-10509
WARNING

Message

Invalid argument sending %d byte UDP Datagram to %s:%d.

Cause: Failed to send UDP datagram with invalid attribute. Presumably bad destination address/port.	%d = The datagram size in bytes. %s = The destination IPv4 address. %d = The destination UDP port number.
Resolution: Review UDP datagram size, destination, and network routing parameters.

SV-TP-10510
NOTICE

Connection

SCTP connection is now %s.

Cause: SIGTRAN SCTP connection has been restarted from the far end. This indicates that the far-end lost and restored contact, prior to this end having noticed that the connection association was fully lost.	%s = The new SCTP state (RESTART).
Resolution: None.

SV-TP-10511
WARNING

Message

Received unsupported SCTP_ASSOC_CHANGE notification. Flags = 0x%x. Length = %d. State = %d. Error = %d. OB Streams = %d. IB Streams = %d. Assoc ID = %d.

Cause:

Received unsupported SCTP association change notification.

%x = The received association change notification's flags.
%d = The received association change notification's length.
%d = The received association change notification's [unsupported] state.
%d = The received association change notification's error.
%d = The received association change notification's outbound stream count.
%d = The received association change notification's inbound stream count.
%d = The received association change notification's association ID.

Resolution:

Contact N-Squared support.

SV-TP-10512
WARNING

Message

Received invalid SCTP_PEER_ADDR_CHANGE notification with length %d != 148.

Cause: Received invalid SCTP peer address change notification.	%d = The received peer address change notification length.
Resolution: Contact N-Squared support.

SV-TP-10513
WARNING

Connection

SCTP connection peer [%s] state is now DOWN (%s).

Cause: SIGTRAN SCTP connection peer is down (unreachable or potentially failed). Note that each SCTP connection may have multiple peers, and the connection communication will function as long as one or more other peers are still up.	%s = The peer address description. %s = The peer status (UNREACHABLE/POTENTIALLY_FAILED).
Resolution: Check network connectivity and connection parameters.

SV-TP-10514
NOTICE

Connection

SCTP connection peer [%s] is now UP (%s).

Cause: SIGTRAN SCTP connection peer is up (available or confirmed).	%s = The peer address description. %s = The peer status (AVAILABLE/CONFIRMED).
Resolution: None.

SV-TP-10515
WARNING

Message

Received unexpected SCTP notification. Type = %d. Length = %d. Flags = 0x%x. SN Length = %d.

Cause: Received unexpected SCTP notification.	%d = The received notification type. %d = The received notification length. %x = The flags for the received notification. %d = The received notification SN length.
Resolution: Contact N-Squared support.

SV-TP-10516
WARNING

Message

Invalid message size sending %d byte UDP Datagram to %s:%d.

Cause: Failed to send UDP datagram with invalid size. Presumably exceeded MTU for route.	%d = The datagram size in bytes. %s = The destination IPv4 address. %d = The destination UDP port number.
Resolution: Review UDP datagram size, destination, and network routing parameters.

SV-TP-10518
ALARM

Connection

%s %s connection (local %s, remote %s) failed: %s

Cause: Logged connection failed during connection attempt or after connecting.	%s = Client/Server indicator. %s = Connection protocol UDP/TCP/SCTP. %s = The actual local IP:port values (or configured hostnames). %s = The actual remote IP:port values (or configured hostnames). %s = Connection failure reason.
Resolution: Review socket, host, SSL configuration.

SV-TP-10518
CLEAR

Connection

%s %s connection is ready. Local = %s, Remote = %s.

Cause: A ClientConnection initiated by is now connected, meaning that the socket transport layer handshake is completed, and if applicable the SSL handshake is also complete. The application may now initiate any protocol-specific validation/login process.	%s = Client/Server indicator. %s = The transport protocol TCP/SCTP/UDP %s = The actual local IP:port values. %s = The actual remote IP:port values.
Resolution: None.

SV-TP-10519
WARNING

Connection

%s %s connection (local %s, remote %s) failed: %s

Cause: Non-logged connection failed during connection attempt or after connecting.	%s = Client (connect) or Server (listen/accept) socket? %s = Connection protocol TCP/SCTP. %s = The actual local IP:port values (or configured hostnames). %s = The actual remote IP:port values (or configured hostnames). %s = Connection failure reason.
Resolution: Review socket, host, SSL configuration.

SV-TP-10520
ALARM

Connection

%s %s connection is congested. Local = %s, Remote = %s.

Cause: Connection has become congested.	%s = Client/Server indicator. %s = The transport protocol TCP/SCTP/UDP %s = The actual local IP:port values. %s = The actual remote IP:port values.
Resolution: Adjust stream buffer size configuration, or reduce traffic on this connection.

SV-TP-10520
CLEAR

Connection

%s %s connection is no longer congested. Local = %s, Remote = %s.

Cause: Connection is no longer congested. This may be because the Connection has terminated.	%s = Client/Server indicator. %s = The transport protocol TCP/SCTP/UDP %s = The actual local IP:port values. %s = The actual remote IP:port values.
Resolution: None.

N2::TCP::Server

SV-TP-11000
NOTICE

Connection

Creating UDP connection for %s

Cause: Application startup. Creating single UDP connection.	%s = The local host:port.
Resolution: None.

SV-TP-11007
ALARM

Connection

Error binding %s server: %s

Cause: Socket bind failed.	%s = Bind protocol. %s = Bind failure detailed message.
Resolution: Review socket and host bind configuration.

SV-TP-11007
CLEAR

Connection

Socket bind/listen succeeded for %s at %s.

Cause: Socket bind & listen succeeded.	%s = Protocol name. %s = Local connection point.
Resolution: None.

SV-TP-11008
WARNING

Connection

Error accepting SCTP on %s: %s

Cause: Error accepting messages on local connection.	%s = The configured local listen description. %s = The error message that occurred when trying to accept on the local connection.
Resolution: Review the associated error result.

SV-TP-11009
WARNING

Connection

Error accepting TCP connection: %s

Cause: Failed to accept inbound TCP connection.	%s = The error result when trying to accept inbound TCP connection.
Resolution: Review the associated error result.

SV-TP-11010
WARNING

Connection

Error creating new %s ServerConnection: %s

Cause: Failed to process new inbound connection.	%s = The protocol type for the stream connection TCP or SCTP. %s = The error result when trying to accept inbound connection.
Resolution: Review the associated error result.

SV-TP-11011
NOTICE

Connection

Accepted SCTP connection from remote IP address %s, remote port %s.

Cause: Application startup. SCTP connection accepted connection from remote IP address.	%s = The configured remote IP address. %s = The configured remote port.
Resolution: None.

N2::TCP::ServerConnection

SV-TP-10400
WARNING

Connection

SSL is not supported on '%s' connections. Ignored.

Cause: SSL is not supported on non-TCP protocol (e.g. UDP).	%s = The configured connection protocol.
Resolution: Check application protocol and SSL configuration.

N2::TCP::ServerConnection::JSON

SV-TP-10900
WARNING

Internal

Callback 'request_received' discarded for method '%s'.

Cause: Sub class does not implement request_received method. Request discarded.	%s = The called method name.
Resolution: Contact N-Squared support.

SV-TP-10901
WARNING

Message

Invalid JSON received: %s

Cause: Received invalid JSON data.	%s = The error result generated when tyring to parse the input JSON.
Resolution: Review the associated error result. Check input JSON is valid.

SV-TP-10902
WARNING

Message

Received JSON of type '%s' but needed HASH (JSON Object).

Cause: Received non hash JSON content.	%s = The type of received JSON data.
Resolution: Check input JSON is valid.

SV-TP-10903
WARNING

Message

Invalid 'jsonrpc' = '%s' (must be '2.0').

Cause: Invalid JSON RPC version.	%s = The received JSON RPC version.
Resolution: Check input JSON is valid.

SV-TP-10904
WARNING

Message

Missing/Empty 'method' supplied.

Cause: JSON RPC message missing method property.	-
Resolution: Check input JSON is valid.

SV-TP-10905
WARNING

Message

Missing/Empty 'id' supplied.

Cause: JSON RPC message missing ID property.	-
Resolution: Check input JSON is valid.

SV-TP-10906
WARNING

Message

Failed to send response: %s

Cause: Failed to send JSON RPC response.	%s = The error result generated when trying to send the JSON RPC response.
Resolution: Review the associated error result. Check receiving application socket is not overloaded.

N2::Trace

SV-AP-10018
WARNING

Message

SNMP trap queue failed: %s. Trap detail: %s

Cause: SNMP trap was not able to be queued for sending.	%s = The reason for failure. %s = The trap details.
Resolution: Check the error message and update configuration and/or implementation accordingly.

SV-AP-10025
WARNING

Message

CLASS %s is missing 'trace_label()' method.

Cause: An N2SVCD class is incorrectly specified.	%s = The class name.
Resolution: Contact N-Squared support.

SV-AP-10065
NOTICE

Application

Suppressed a total of %d duplicate warnings [%s].

Cause: The same warning ID was logged too many times in a fixed interval.	%d = The number of warnings that were suppressed. %s = The event ID of the suppressed warnings.
Resolution: Address the underlying problem which caused the warnings.

N2::Trace::SNMPBroker

SV-AP-10010
WARNING

Configuration

SNMP App Name '%s' discovery failed: %s

Cause: SNMP application discovery immediate failure.	%s = The configured SNMP application name. %s = The reason for immediate failure.
Resolution: Check global SNMP application name configuration.

SV-AP-10022
NOTICE

Application
Configuration

No SNMP user defined for outbound traps. No message security will be applied.

Cause: No SNMP user is defined for outbound SNMP traps. Messages will be sent without security.	-
Resolution: None.

SV-AP-10026
WARNING

Message

Abandoning undeliverable queued SNMP trap from broker. Trap detail: %s

Cause: Queued SNMP trap was discarded due to too many pending traps in the SNMP broker.	%s = The trap details.
Resolution: Increase the SNMP broker queue size. Ensure all N2SVCD applications start correctly.

SV-AP-10027
WARNING

Message

Failed to encode queued SNMP v3 trap: %s. Trap detail: %s

Cause: Queued SNMP v3 trap was was unable to be encoded.	%s = The encoding result. %s = The trap details.
Resolution: Contact N-Squared Support.

SV-AP-10028
WARNING

Message

Failed to encode queued SNMP v2c trap: %s. Trap detail: %s

Cause: Queued SNMP v2c trap was was unable to be encoded.	%s = The encoding result. %s = The trap details.
Resolution: Contact N-Squared Support.

SV-AP-10036
WARNING

Message

SNMP application '%s' is not available, abandoning. Trap details: %s

Cause: Target SNMP application is invalid or not available for outbound proxying of SNMP trap. Trap will not be sent.	%s = The target application name. %s = The trap details.
Resolution: Ensure SNMP applications are running without error. Check SNMP configuration.

SV-AP-10037
WARNING

Message

Failed to pass SNMP trap for proxying, abandoning: %s. Trap details: %s

Cause: SNMP trap was was unable to be passed to an SNMP application for outbound proxying. Trap will not be sent.	%s = The target application name. %s = The trap details.
Resolution: Review error message. Ensure SNMP applications are running without error. Check SNMP configuration.

N2::Trace::SNMPClientConnection

SV-AP-10055
WARNING

Message

Abandoning undeliverable queued SNMP trap from broker client. Trap detail: %s

Cause: Queued SNMP trap was discarded due to too many pending traps in the SNMPb broker client.	%s = The trap details.
Resolution: Increase the SNMP broker queue size. Ensure all N2SVCD applications start correctly.

SV-AP-10059
WARNING

Message

Discarding failed SNMP trap: %s. Trap detail: %s

Cause: SNMP trap failed to send for a reason other than connection refused. The trap will be discarded.	%s = The send result. %s = The trap details.
Resolution: Review error message and update configuration accordingly.

TesterApp

SV-TR-10000
NOTICE

Application

Default DB App Name for '%s' requests is '%s'.

Cause: Parameter configuration at startup. Default request DB app name.	%s = Request type. %s = DB app name.
Resolution: None.

SV-TR-10001
NOTICE

Application

Default default DB App Name for requests is '%s'.

Cause: Parameter configuration at startup. Default DB app name.	%s = DB app name.
Resolution: None.

SV-TR-10002
NOTICE

Application

Default REST App Name for '%s' requests is '%s'.

Cause: Parameter configuration at startup. Default REST app name.	%s = Request type. %s = REST app name.
Resolution: None.

SV-TR-10003
NOTICE

Application

Default default REST App Name for requests is '%s'.

Cause: Parameter configuration at startup. Default REST app name.	%s = REST app name.
Resolution: None.

SV-TR-10004
NOTICE

Application

Default SMPP App Name for requests is '%s'.

Cause: Parameter configuration at startup. Default SMMP app name.	%s = SMMP app name.
Resolution: None.

SV-TR-10005
NOTICE

Application

Default PI App Name for requests is '%s'.

Cause: Parameter configuration at startup. Default PI app name.	%s = PI app name.
Resolution: None.

SV-TR-10006
NOTICE

Application

Default OSD App Name for requests is '%s'.

Cause: Parameter configuration at startup. Default OSD app name.	%s = OSD app name.
Resolution: None.

SV-TR-10007
NOTICE

Application

Default OSD App Name for '%s' requests is '%s'.

Cause: Parameter configuration at startup. Default OSD app name.	%s = Request type. %s = OSD app name.
Resolution: None.

SV-TR-10008
NOTICE

Application

Default Diameter App Name for requests is '%s'.

Cause: Parameter configuration at startup. Default Diameter app name.	%s = Diameter app name.
Resolution: None.

SV-TR-10009
NOTICE

Application

Default SIGTRAN App Name for requests is '%s'.

Cause: Parameter configuration at startup. Default Sigtran app name.	%s = Sigtran app name.
Resolution: None.

SV-TR-10010
NOTICE

Application

Will listen for JSON on '%s:%s'.

Cause: Parameter configuration at startup. JSON RPC host and port.	%s = JSON RPC host. %s = JSON RPC port.
Resolution: None.

SV-TR-10011
NOTICE

Application

Default SCP TCAP Timeout = %d seconds.

Cause: Parameter configuration at startup. Default SCP TCAP timeout.	%d = SCP TCAP timeout seconds.
Resolution: None.

SV-TR-10012
NOTICE

Application

Default Request Timeout = %d seconds.

Cause: Parameter configuration at startup. Default request timeout.	%d = Request timeout seconds.
Resolution: None.

SV-TR-10013
NOTICE

Application

Default PI Timeout = %d seconds.

Cause: Parameter configuration at startup. Default PI timeout.	%d = PI timeout seconds.
Resolution: None.

SV-TR-10014
NOTICE

Application

Default OSD Timeout = %d seconds.

Cause: Parameter configuration at startup. Default OSD timeout.	%d = OSD timeout seconds.
Resolution: None.

SV-TR-10015
NOTICE

Application

Default REST Timeout = %d seconds.

Cause: Parameter configuration at startup. Default REST timeout.	%d = REST timeout seconds.
Resolution: None.

SV-TR-10016
NOTICE

Application

Default Diameter Timeout = %d seconds.

Cause: Parameter configuration at startup. Default Diameter timeout.	%d = Diameter timeout seconds.
Resolution: None.

SV-TR-10017
NOTICE

Configuration

No registration found for SMPP '%s' to Destination Address '%s'.

Cause: No registered destination address for SMPP PDU.	%s = PDU. %s = Destination address.
Resolution: Check SMMP destination address configuration.

SV-TR-10018
WARNING

Configuration

No registration found for Diameter Session-Id '%s'.

Cause: No registration found for Diameter Session-Id.	%s = Diameter Session-Id.
Resolution: Review configuration for Diameter message handling.

SV-TR-10019
NOTICE

Job

Discarding abandoned run ID '%s' (finished %s > %s seconds ago).

Cause: Discarding abandoned test run.	%s = The abandoned test run ID. %s = The time since the test run finished. %s = The discard timeout.
Resolution: None.

SV-TR-10020
WARNING

Message

Discarding '%s' message with no instance context.

Cause: Message received with no instance context.	%s = Received message context.
Resolution: Review the message type. Review the message content construction.

SV-TR-10021
WARNING

Job

Failed to create test run id '%s': %s

Cause: Failed to create test run.	%s = Test run ID. %s = Test run creation error.
Resolution: Review the associated error result.

SV-TR-10022
WARNING

Configuration

Parameter OSSN is now a SigtranApp parameter, not a TesterApp parameter.

Cause: Parameter configuration at startup. OSSN configuration is no longer applicable to Tester app.	-
Resolution: Review application configuration.

SV-TR-10023
WARNING

Message

Invalid/Missing SMPP for inbound SMPP.

Cause: SMPP missing for inbound SMPP.	-
Resolution: Check inbound SMPP message content.

SV-TR-10024
WARNING

Message

Invalid/Missing PDU for inbound SMPP.

Cause: SMPP missing PDU.	-
Resolution: Check inbound SMPP message content.

SV-TR-10025
WARNING

Message

Unsupported PDU '%s' for inbound SMPP.

Cause: Unsupported PDU for inbound SMPP.	%s = Unsupported PDU.
Resolution: Check inbound SMPP message content.

SV-TR-10026
WARNING

Message

Invalid/Missing Destination Address for inbound '%s'.

Cause: SMPP message missing destination address for inbound PDU.	%s = PDU missing destination address.
Resolution: Check inbound SMPP message content.

SV-TR-10027
WARNING

Message

Invalid/Missing Diameter details for inbound Diameter request.

Cause: Inbound Diameter message missing Diameter content.	-
Resolution: Check inbound Diameter message content.

SV-TR-10028
WARNING

Message

Invalid/Missing Session-Id for inbound Diameter.

Cause: Inbound Diameter message invalid/missing Session-Id.	-
Resolution: Check inbound Diameter message content.

SV-TR-10049
NOTICE

Application

EDR stream [%s]. Dir = '%s'.

Cause: Application configuration at startup. Creating EDR stream definition.	%s = The EDR stream key. %s = The configured EDR output directory.
Resolution: None.

SV-TR-10051
NOTICE

Application

Default OSD Timeout = %d seconds.

Cause: Parameter configuration at startup. Default OSD timeout.	%d = OSD timeout seconds.
Resolution: None.

SV-TR-10202
NOTICE

Application

Max EDRs per stream to cache = %d.

Cause: Parameter configuration at startup. Max EDRs per stream to cache.	%d = Number of max EDRs per stream to cache.
Resolution: None.

SV-TR-10203
NOTICE

Application

EDR Check Milliseconds = %d.

Cause: Parameter configuration at startup. EDR check milliseconds.	%d = Number of milliseconds between checks for new EDRs on disk.
Resolution: None.

SV-TR-10204
WARNING

Resource

Skipped %d malformed lines during EDR searching.

Cause: Detected bad EDR formatting lines during EDR processing.	%d = The amount of malformed lines that were detected.
Resolution: Review EDR generation for invalid content.

SV-TR-10205
WARNING

Resource

Found bad line when reading EDR content: '%s'

Cause: Detected a badly formatted line while trying to read EDR data.	%s = The malformed line.
Resolution: Review EDR generation for invalid content.

SV-TR-10206
NOTICE

Application

EDR Margin Seconds = %d.

Cause: Parameter configuration at startup. EDR margin seconds.	%d = Number of seconds to allow for EDR margin seconds.
Resolution: None.

SV-TR-10207
NOTICE

Application

EDR Retirement Seconds = %d.

Cause: Parameter configuration at startup. EDR retirement seconds.	%d = Number of seconds until an inactive EDR file is "retired" and will no longer be checked for mtime.
Resolution: None.

SV-TR-10208
WARNING

Resource

Failed action [%s] on EDR file '%s': %s

Cause: System occurred while reading/processing EDR file.	%s = The activity being performed on the file. %s = The name of the file. %s = The associated file access error message.
Resolution: Review directory/file permissions and usage.

TesterApp::JsonServerConnection

SV-TR-10029
WARNING

Message

TesterApp::JsonConnection: Require 'params' to be HASH if present.

Cause: Received non-hash input parameters.	-
Resolution: Check input `params` correctly configured as hash.

TesterApp::TestInstance

SV-TR-10047
WARNING

Job

Cause: Test failure/abort reason.	%s = Abort reason.
Resolution: Review the associated abort reason.

SV-TR-10048
WARNING

Job

Failed to parse Set-Cookie attribute '%s'.

Cause: Cannot parse an attribute contained in a Set-Cookie header. This attribute is ignored.	%s = Text of the unsupported attribute.
Resolution: Contact N-Squared support.

TesterApp::TestRun

SV-TR-10030
WARNING

Configuration

Requested default DB Agent '%s' is not a known Application.

Cause: Default DB agent application not found.	%s = Default DB app name.
Resolution: Check DB agent application configuration.

SV-TR-10031
WARNING

Configuration

Requested %s DB Agent '%s' is not a known Application.

Cause: Default named DB agent application not found.	%s = Default named key. %s = DB app name.
Resolution: Check named DB agent application configuration.

SV-TR-10032
WARNING

Configuration

Requested default REST Agent '%s' is not a known Application.

Cause: Default REST agent application not found.	%s = REST app name.
Resolution: Check REST agent application configuration.

SV-TR-10033
WARNING

Configuration

Requested %s REST Agent '%s' is not a known Application.

Cause: Default named REST agent application not found.	%s = Default named key. %s = REST app name.
Resolution: Check named REST agent application configuration.

SV-TR-10034
WARNING

Configuration

Requested SMPP Agent '%s' is not a known Application.

Cause: SMPP agent application not found.	%s = SMPP app name.
Resolution: Check SMPP agent application configuration.

SV-TR-10035
WARNING

Configuration

Requested PI Agent '%s' is not a known Application.

Cause: PI agent application not found.	%s = PI app name.
Resolution: Check PI agent application configuration.

SV-TR-10036
WARNING

Configuration

Requested OSD Agent '%s' is not a known Application.

Cause: OSD agent application not found.	%s = OSD app name.
Resolution: Check OSD agent application configuration.

SV-TR-10038
WARNING

Configuration

Requested Diameter Agent '%s' is not a known Application.

Cause: Diameter agent application not found.	%s = Diameter app name.
Resolution: Check Diameter agent application configuration.

SV-TR-10039
WARNING

Configuration

Requested SIGTRAN Agent '%s' is not a known Application.

Cause: SIGTRAN agent application not found.	%s = SIGTRAN app name.
Resolution: Check SIGTRAN agent application configuration.

SV-TR-10040
WARNING

Job

Failed to start new instance %d for run id '%s': %s

Cause: Failed to start new instance.	%d = Run instance index. %s = Run ID. %s = Instance creation error.
Resolution: Review the associated error result.

SV-TR-10041
WARNING

Job

Failed to start first instance for '%s': %s

Cause: Failed to start first instance for run.	%s = Run ID. %s = Error result message.
Resolution: Review the associated error result.

SV-TR-10042
WARNING

Job

Trace has been enabled with backlog '%ig' > %i. Abort Run.

Cause: Trace enabled with performance backlog exceeding maximum trace backlog.	%i = Configured backlog value. %i = Maximum debug backlog value.
Resolution: Check backlog configuration.

SV-TR-10043
WARNING

Job

Failed to start instance for '%s': %s

Cause: Failed to start performance test instance.	%s = Run ID. %s = Error result message.
Resolution: Review the associated error result.

SV-TR-10044
WARNING

Job

Trace has been enabled with cps '%i' > %i. Abort Run.

Cause: Trace enabled with performance CPS exceeding maximum trace CPS.	%i = Configured CPS. %i = Max debug CPS.
Resolution: Check CPS configuration.

SV-TR-10045
WARNING

Job

Trace has been enabled with backlog '%i' > %i. Abort Run.

Cause: Trace enabled with performance backlog exceeding maximum trace backlog.	%i = Configured backlog. %i = Max debug backlog.
Resolution: Check backlog configuration.

SV-TR-10046
WARNING

Job

Failed to start instance for '%s': %s

Cause: Failed to start test instance.	%s = Run ID. %s = Error result message.
Resolution: Review the associated error result.

Statistics

The following 17 statistics may be generated by N2SVCD Application “TesterApp”.

No statistics found that match search criteria.

N2::Application

instance.count Type: Gauge Scope: Job OID: -

Cause:

The number of open application instances. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc.

instance.throttle.max_instances Type: Counter Scope: Message OID: -

Cause:

Maximum number of instances exceeding the max number of instances.

instance.throttle.max_tps_average Type: Counter Scope: Message OID: -

Cause:

Average max TPS for the last throttle period.

snmp.msg.proxy Type: Counter Scope: Message OID: 1.3.6.1.4.1.56540.2.1.1.1

Cause:

Proxied SNMP requests received from an SNMP app. Note that only (some) request-type SNMP PDUs are sent to applications.

Tags:	`type`	`get`	Internal requests received from an SNMP get-request PDU.
		`next`	Internal requests received from an SNMP get-next-request PDU.
		`bulk`	Internal requests received from an SNMP get-bulk-request PDU.
		`set`	Internal requests received from an SNMP set-request PDU.
		`other`	Internal requests received from other SNMP PDUs.

N2::Application::AppInstance

instance.abort Type: Counter Scope: Job, Message OID: -

Cause:

Application instances aborted due to receiving an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. Note that aborted instances are still counted in instance.shutdown.

instance.shutdown Type: Counter Scope: Job, Message OID: -

Cause:

Application instances shut down (for any reason, including abort). Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc.

instance.start Type: Counter Scope: Job, Message OID: -

Cause:

Application instances started. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc.

TesterApp

instance.unhandled.invalid.ati Type: Counter Scope: Job, Message OID: -

Cause:

TCAP instances not started due to MAP ATI decode failure.

instance.unhandled.invalid.srism Type: Counter Scope: Job, Message OID: -

Cause:

TCAP instances not started due to MAP SRI-SM decode failure.

run.refused Type: Counter Scope: Message OID: -

Cause:

Test runs refused.

Tags:	`reason`	`bad_id`	Test runs not started due to missing or invalid 'run_id'.
		`duplicate_id`	Test runs not started due to duplicate 'run_id'.
		`bad_vars`	Test runs not started due to invalid 'vars' object.
		`locked`	Test runs not started due to lock already being in use.
		`cannot_start`	Test runs not started due to unexpected error.

run.refused.bad_lock Type: Counter Scope: Message OID: -

Cause:

Test runs refused due to bad lock data.

Tags:	`reason`	`type`	Test runs not started due to invalid array 'locks'.
		`entry`	Test runs not started due to invalid 'locks' array entry.
		`entry_key`	Test runs not started due to invalid 'locks' array entry 'key'.
		`entry_wait`	Test runs not started due to invalid 'locks' array entry 'wait'.
		`entry_eval`	Test runs not started due to 'locks' array entry 'key' failing to evaluate.
		`entry_result`	Test runs not started due to 'locks' array entry 'key' failing to evaluate to a scalar.

run.start Type: Counter Scope: Service OID: -

Cause:

Test runs started successfully.

TesterApp::JsonServerConnection

rpc.json.params.error Type: Counter Scope: Job OID: -

Cause:

Received non-hash input parameters.

Tags:	`reason`	`execute`	JSON RPC ExecuteTest request received with invalid 'params' object.
		`query`	JSON RPC QueryTest request received with invalid 'params' object.
		`query_all`	JSON RPC QueryAllTests request received with invalid 'params' object.
		`cancel`	JSON RPC CancelTest request received with invalid 'params' object.
		`resume`	JSON RPC ResumeInstance request received with invalid 'params' object.
		`unknown`	Unknown JSON RPC request received with invalid 'params' object.

rpc.json.request Type: Counter Scope: Job OID: -

Cause:

JSON RPC requests received with valid parameters.

Tags:	`reason`	`execute`	JSON RPC ExecuteTest request received.
		`query`	JSON RPC QueryTest request received.
		`query_all`	JSON RPC QueryAllTests request received.
		`cancel`	JSON RPC CancelTest request received.
		`resume`	JSON RPC ResumeInstance request received.
		`unknown`	Unknown JSON RPC request received.

TesterApp::TestRun

instance.refused.cannot_start Type: Counter Scope: Service OID: -

Cause:

Test run instances unable to start due to an unexpected error.

run.abort Type: Counter Scope: Service OID: -

Cause:

Test runs aborted.

run.complete Type: Counter Scope: Service OID: -

Cause:

Test runs completed.