Table Lookup Profile Blocks
Table Lookup Profile Blocks
N2FE supports the configuration of the available profile blocks for use within the TableLookup
node.
In NCC the show/hide and display text settings of the profile blocks can be configured as required through various JNLP configuration files. N2FE also allows for the configuration of the node specifc profile blocks as well as well profile block translation.
To configure the profile blocks there are two key steps required:
- Configure the N2FE configuration file,
/etc/jarvis/n2fe.xml
to enable and disableTableLookup
profile blocks. - Configure the branding level or global level translation files to alter profile block names.
N2FE Service Configuration
All TableLookup
available profile blocks are configured via a list of active profile blocks within the habitat
configuration element and can be altered as required.
The habitat must include the following XML fragment:
"table_lookup_profile_blocks" : [3, 7, 18],
Profile Block Mappings
The following profile block mappings are supported and can be enabled and disabled by either including or excluding the profile block ID in the configuration array.
Profile Block ID | Profile Block |
---|---|
1 |
VPN Network Profile |
2 |
VPN Station Profile |
3 |
Customer Profile |
4 |
Control Plan Profile |
5 |
Global Profile |
6 |
CLI Subscriber Profile |
7 |
Service Number Profile |
8 |
App Specific 1 |
9 |
App Specific 2 |
10 |
App Specific 3 |
11 |
App Specific 4 |
12 |
App Specific 5 |
13 |
App Specific 6 |
14 |
App Specific 7 |
15 |
App Specific 8 |
16 |
Any Valid Profile |
17 |
Temporary Storage |
18 |
Call Context |
19 |
Outgoing Extensions |
20 |
Incoming Extensions |